Wastewater Effluent Control
When fuel leaked from pipe, spilled at facility, leaked from storage tank,
water mixed with detergent is used to wash and clean spilled.
And then flush all wastes into a wastewater pond.
Often, grease and oil are floating on top and this effluent will damage surrounding environment considerably.
Agri Kit Cost Effective Solution
 Connect submerge pump with hose to the in-feed point,
and out-feed water flows back to wastewater pond.
Pump water through several cycles until water turns into slightly blue.
The oil and grease are degraded further through Agri kit electrical field.
Leave the treated water alone for a period of time, several hours.
Major floating solids form masses and are condensed at the bottom.
Use a filter ot underwater vacuum to collect slurry materials.
After this, the wastewater is ready for discharge.
Remove heavy metals, pesticides, petro-chemicals, even low radioactive materials.
A cost effective way at effluent wastewater control
Performance Test
A simple performance test shows how to validate its performance at your wastewater pond.
|
|
|
|
